EATON CORPORATION
MEDICAL-GRADE UPS 1000VA 750W

MEDICAL-GRADE UPS 1000VA 750W

Part Number:
SMX1200XLHG
Language:
UK

£740.87  (Excl VAT)

Introduction

Tripp Lite’s SMX1200XLHG medical-grade UPS system provides dependable battery backup and is fully compliant with UL 60601-1 regulations when plugged into a hospital-grade outlet, making it ideal for use in patient-care vicinities. The 1kVA/750W capacity provides up to 27.5 minutes of runtime for a half load, or 11 minutes for a full load so you can work through short power failures and perform an orderly system shutdown in a prolonged blackout.

Built-in line-interactive voltage regulation corrects brownouts as low as 155V and overvoltages as high as 274V to normal 230V nominal output, without drawing battery power. The SMX1200XLHG’s built-in isolation transformer with Faraday shield offers full isolation and removes common mode noise while maintaining full AC surge suppression in all modes. Cumulative leakage current of all connected equipment is less than 100 microamps.

This UPS system features six IEC320 C13 hospital-grade outlets and has a hospital-grade IEC320 C14 plug on a 15 cm (6 in.) dongle. All six outlets provide both backup protection and surge protection, rated to 340 joules.

The SMX1200XLHG also features diagnostic LEDs, as well as a USB port and a DB9 serial port that work with Tripp Lite’s included PowerAlert software for safe, unattended system shutdown and file saves in the event of a prolonged power failure.

Application Usage

This UPS contains a lead acid battery designed to be connected continuously to an AC power source, except during brief power outages. It is not intended for frequent charge/discharge cycles, such as mobile cart applications where the UPS is often disconnected from the power source. Using the SMX1200XLHG in this type of application will void the battery warranty.

Provides Ideal UPS Backup in Healthcare Facilities
Compliant with UL 60601-1 standards for use in patient-care vicinities, when plugged into a hospital-grade outlet
Built-in isolation transformer with Faraday shield offers full isolation and removes common mode noise

Battery Backup and Full Surge Protection
27.5 minutes runtime for half load (375W); 11 minutes for full load (750W)
All six hospital-grade outlets provide surge protection rated to 340 joules
EMI/RFI noise filtering ensures equipment runs smoothly without line noise interference
Resistant to electrostatic discharge

LEDs and Audible Alarms Keep You Aware of Power Status
Indicator lights on the front of the unit show you when the UPS is on and supplying utility power, when operating in voltage correction mode or in battery mode, relative load level and low-battery warning
Audible alarms alert you to power failure, overload and low battery conditions; the alarm’s mute/quiet mode ensures patients are not disturbed

Saves Your Files, Even When You’re Away
Works with Tripp Lite PowerAlert software (included) to enable safe, unattended system shutdown and files saves during prolonged power failures
Connects to your computer via either the DB9 port or USB port

Features

Output power capacity

1 kVA

Output power

750 W

Input operation voltage (min)

230 V

Input operation voltage (max)

230 V

Input frequency

50/60 Hz

Output operation voltage (min)

230 V

Output operation voltage (max)

230 V

Maximum current

10 A

Surge energy rating

340 J

EMI/RFI noise filtering

Y

Surge protection

Y

Power protection features

Over voltage, Under voltage

Audible alarm(s)

Y

Country of origin

China

Ports & interfaces

AC outlet types

C13 coupler

Power plug

C14 coupler

AC outlets quantity

6 AC outlet(s)

Battery

Typical backup time at full load

11 min

Typical backup time at half load

27.5 min

Battery recharge time

4.5 h

Hot-swap battery

Y

Cold start

Y

Design

Form factor

Tower

Product colour

White

LED indicators

Y

Certification

CE, IEC 60601-1

Operational conditions

Operating temperature (T-T)

0 - 40 °C

Storage temperature (T-T)

-15 - 50 °C

Operating relative humidity (H-H)

0 - 95%

Weight & dimensions

Width

190.5 mm

Depth

229.9 mm

Height

322.6 mm

Weight

20.6 kg

Package width

309.9 mm

Package depth

339.9 mm

Package height

469.9 mm

Package weight

22.1 kg

Logistics data

Master (outer) case width

309.9 mm

Master (outer) case length

339.9 mm

Master (outer) case height

469.9 mm

Master (outer) case gross weight

22.1 kg

Products per master (outer) case

1 pc(s)

Other features

Interface

USB; DB9

No options for this product
.